本产品具有非常好的脱模性能，形成持久且薄的模皮。使用时，可使用喷射设备，也可以用刷子或布擦拭。在大多数情况下，可多次脱模。在使用中显示，应用于环氧、三聚氰胺、酚醛塑料、聚酯和聚氨酯材料时，脱模性能尤佳。当形成膜皮非常薄时，脱模特征最好。使用之前，模具温度要求在80-120℃左右，将模具清洗干净后，把脱模剂原液按1：20-1：30倍用120号溶剂油或二氯甲烷稀释后直接喷涂或刷抹在模具型腔内即可。

This product has a very good demoulding performance, forming a durable and thin mold skin. When used, a spray device can be used, or a brush or cloth can be wiped. In most cases, it can be removed many times. In the use of epoxy, melamine, phenolic plastics, polyester and polyurethane materials, the demoulding performance is excellent. When the formation of membrane is very thin, the best release characteristics. Before use, the mold temperature should be around 80-120 C. After cleaning the mold, the mould release agent should be diluted by 1:20-1:30 times with 120 solvent oil or dichloromethane, and then directly spray or brush in the mold cavity.