注塑脱模剂不仅会用在金属表面的模具上进行脱模，也会用在塑料表面的物品进行脱模。
Injection demoulding agent will not only be used on the metal surface of the mold for demoulding, but also on the plastic surface of the object for demoulding.
一般来说，在大型的工厂里面，经常会需要使用到注塑脱模剂，由于用量比较大，一般都会到厂家进行批发。那么，注塑脱模剂怎么全沾到注塑出来的塑胶件上呢，到底是什么原因造成的呢？
Generally speaking, in large-scale factories, often need to use injection mold release agent, because the amount is relatively large, will generally go to the manufacturer for wholesale. Then, how can the injection mold release agent all stained on the injection molded plastic parts, what is the cause?
1.使用注塑脱模剂的方法不对
1. the use of injection mold release agent is not right.
2.喷注塑脱模剂过多的原因
2. injection molding agent too much reason
那么，又怎样解决以上两个问题呢？
Then, how do we solve these two problems?
1.正确使用注塑干性脱模剂的方法是：确定产品型号与使用一致，把瓶摇匀，从相距喷件25-30厘米处轻按下阀门均匀喷射即可。
1. The correct way to use injection dry release agent is to determine the product type and use the same, shake the bottle evenly, from the spray 25-30 centimeters away from the valve can be gently pressed even spray.
2.避免在注塑脱模剂过量喷涂：一定要等到溶剂挥发完全后再喷涂。模具和喷头的距离保持在25-30厘米，建议平移喷涂。
2. avoid excessive spraying of injection mold release agent: wait until the solvent is completely vaporize before spraying. The distance between the mold and the sprinkler is kept at 25-30 centimeters. It is recommended to shift the spray.