邢台空调维修诚信售后

脱模剂的具体作用原理如下：

The specific action principle of the release agent is as follows:

1、极性化学键与模具表面通过相互作用形成具有再生力的吸附型薄膜；

1, the polar chemical bond interacts with the mold surface to form an adsorption film with regenerative force;

2、聚硅氧烷中的硅氧键可视为弱偶极子（Si＋－O－），当脱模剂在模具表面铺展成单取向排列时，分子采取特有的伸展链构型；

2. The silicon oxygen bond in polysiloxane can be regarded as weak dipole (Si + - O -). When the release agent is spread into single orientation on the surface of the mold, the molecule adopts a unique stretching chain configuration;

3、自由表面被烷基以密集堆积方式覆盖，脱模能力随烷基密度而递增；但当烷基占有较大空间位阻时，伸展构型受到限制，脱模能力又会降低；

3. The free surface is covered by the dense packing, and the release capacity increases with the alkyl density; however, when the alkyl occupies a larger steric hindrance, the extensional configuration is limited, and the stripping capability will decrease;

4、脱模剂分子量大小和粘度也与脱模能力相关，分子量小时，铺展性好，但耐热能力差。

4. The molecular weight and viscosity of the release agent are also related to the stripping ability. The molecular weight is small, but the spreading property is good, but the heat resistance is poor.