邢台空调维修诚信售后

用法一、橡胶脱模剂重涂时必须将原有的漆膜除掉，或采用配套的脱漆剂将原模板漆脱掉，严格禁止在原有的漆膜上涂刷脱模剂，否则会影响附着力，尽而影响脱模剂的使用效果;

First, when rubber demoulding agent is repainted, the original paint film must be removed, or the necessary paint remover should be used to remove the original template paint. It is strictly forbidden to paint the release agent on the original paint film, otherwise it will affect the adhesion and affect the effect of the release agent.

用法二、模板处理严格按照技术要求进行处理，脱模剂涂刷厚度均匀，光滑且有一定的光泽;

The use of two, the template treatment in strict accordance with the technical requirements to handle, the mold coating thickness is uniform, smooth and a certain luster;

用法三、根据气温情况尽量在白天天气好的时候涂刷脱模剂，避免在傍晚涂刷脱模剂，一是夜晚脱模剂由于温度原因干燥的比较慢，二是如果傍晚涂刷脱模剂，就势必会打开灯光，这样就会与很多蚊虫都在黏在脱模剂之上，进而影响脱模效果，所以涂刷脱模剂的时候关注天气预报，尽量避免有雨水或雾气的天气里涂刷脱模剂;

Three, according to the usage temperature when the weather is good as far as possible during the day in the evening to avoid brushing release agent brushing release agent is a night release agent because of slow drying temperature is two, if the evening brushing release agent, it will open the light, so that it will be very much and are stuck in the mosquito release agent. Then, influence of demolding effect, so when brushing release agent on the weather, to avoid the rain or fog weather brushing release agent;

用法四、注意文明施工，模板装卸过程中注意不要让钢筋或其它硬物刮花脱模剂，这样即便修补后也可正常使用，但对混凝土外观的颜色会略有影响。

Usage four, pay attention to civilized construction. In the process of formwork loading and unloading, pay attention not to let steel bar or other hard objects scrape flower release agent, so that even after repair, it can also be used normally, but it will have a slight effect on the appearance of concrete.